How to add or tweak a controller mapping

Kytrooper: You mean a knob like a volume knob? Something that has a hard top and bottom? If it’s an endless knob, then you can use the exact procedure the video shows.

Is there something like a API specification for MIDI scripting for Mixxx? It’d be interesting to see all the values you could get and set, for instance.

Yes -> http://mixxx.org/wiki/doku.php/mixxxcontrols

That page is far from complete.

Do you mean it’s missing controls? We try to add them as we update the code on GitHub. I’m about to go through and make sure that some brand new ones for Mixxx 1.12.0 (effects framework, harmonic mixing, master sync, beatjumps, loop move, and talkover ducking) are documented.

However, that page is just a list of the possible controls you can change. For more info about how to use them with mappings or how to write Javascript to control them then click the wiki links in point #2 and #4 of the first post in this thread.

Feel free to post in this forum if you need help. Many of us hang out on IRC if you want to chat :slight_smile:.

cheers,
RJ

Recently bought a Numark MIXTRACK EDGE and am looking to make a map for it for Mixxx since the software it comes with is garbo. There are several buttons on the controller that are supposed to activate different modes for the buttons/jog-wheels. How would one go about coding some sort of conditional function?
(i.e. if the FX key is pressed [status: 0x90; midino:0x1F], the jog wheels [L-- status: 0x1B; midino: 0x25 :: R-- status: 0xB2; midino: 0x25] scratch. When pressed again [status: 0x80; midino: 0x1F], the jog wheels stripsearch.)

Hey, i just bought the same product and having the same issues. Where do you input the mappings manually? it only lets me map it using the wizard.

Please read the first post in the thread.

After you have made a mapping and it has been approved for inclusion in the next Mixxx release, please add it to the appropriate tables DJ Hardware Guide on the wiki. If the controller has an integrated sound card, also add details about that to the appropriate table towards the bottom of the page. Make a new wiki page with the name of the controller. On that page, put a picture of the controller, a link to the page on the manufacturer’s website for the controller, a description of your mapping (and ideally a diagram too), and a link to any documentation (such as the manufacturer’s manual) that you used to make the mapping.

Hello! My name is Marto from Argentina.
I recentely bouhgt an Iconpad controller (not a DJ controller).
http://icon-global.com/product/iconpad/

The issue is that ribbon faders are detected only as on/off (touch/release) buttons.
When pressed and slide over it, the leds on the ribbon shows the possition you are touching when slide your finger over it, but Mixxx (best DJ softwre ever!!!) only enable the pre-fixed position of the fader on the screen (i.e. Deck A master volume) when you held (and/or move over the ribbon) your finger or mute (the "in screen fader goes to bottom) when you release it, using the built-in midi learn functuion to map it.

Now Im reading all the documentation about midi mapping and scripting, but maybe (not only maybe, I hope) someone here can give me a little kickstarter advice (but not to throw away the device) in how to the make Mixxx (is the best DJ software ever, did I tell it before?) recognize the main function of the ribbon (to be a fader) and not the first data recieved from the device (the I/O finger-press sensor).
Dont have any experience dealing with midi devices, but maybe someone has deal with this issue or similar before, and have a near idea in how to make it works properly.
Im interested in this device because it had:
4 layers of 8 channel ribbon faders+4 control buttons for each+one rotary knob with push function for each
3 layers of 9 customizable pads
and a transport ontrol layer.

It seems very flexible for multipurpose audio working, including simultaneuos control of several software switching between layers.

I saw the Pegasus youtube video for scratching. Helped my a lot to learn how the scripts works.
Im not sure if I have to make a script that ignores the push/release sensor data or make one that took that info as conditional (like a “shift” or “function” key) to allow to move the fader.

Im running Mixxx on a winbug 7 64bit machine.

Thanks a lot in advance!!!
Marto

It’s possible that your controller sends both a note on/off MIDI signal when the touch strips are touched and released as well as a control change (CC) MIDI signal indicating where on the strip you are touching. The MIDI Learning Wizard may only be reacting to the on/off signal. If this is the case, you should be able to take care of this with just XML and won’t need scripting. However, you’ll need to edit the XML manually rather than rely entirely on the Learning Wizard. Look at the incoming MIDI signals to Mixxx to figure out what’s going on. See the MIDI Crash Course for instructions on how to view the incoming MIDI signals.

Thanks for your answer!!!
This is what I get from the debugger when touched and slide from bottom to top.
Sorry for the extension.
Could you plesae help me to quick understand what data I have to take from here to use with the XML file?
Thanks again!!

Use the signals with status 0xE0 rather than 0x90. It seems that it’s sending 14-bit pitch bend signals. I’m not sure how to map those. I think the XML format assumes that the second byte (MIDI note) of each message is constant for every component of the controller, so you may need a separate element with a different element for every possible value (0 through 0x7F) :confused: There are fourteen-bit-lsb/fourteen-bit-msb options, but I think those are for controllers that send two separate MIDI messages, each with a constant note number, for a single component of the controller.

Those are mapped in XML just like any other control, except you skip the element. (There is only one 0xEn message per MIDI channel.) Mixxx knows that the next two bytes after an 0xEn are a little-endian 14-bit value per the MIDI standard. (Wiki updated with this info.)

Hi

I have a Behringer 1002 desk connected to an audio interface that I want to use for my radio broadcast using Mixx.

Can anyone tell me in ‘Janet and John’ language how to use this as the controller? P.s I am using Mac.

Thanks

Barry

Hi

thanks for this - i am struggling though.

I have copied the xml file from a mapping to the controllers folder but still can’t see it to select it in the controller prefs in Mixxx- even after restart.

Any suggestions?

thanks
Sam

Open the mixxx log file : mixxx.org/wiki/doku.php/finding … x.log_file
Locate a line that says

It will tell you the folders where Mixxx is looking for controller presets

This is an example of mine:

Also, remember that the mapping will appear ordered by the name specified inside the controller xml file:

Also please note that the list shows first the controllers on Mixxx application folder, and after those, it lists the controllers on the user folder.

Hi
thanks - that worked, there was a second folder it was looking in.

now i have this issue with the jog wheels - i will ask the guy who made the mapping but would you expect the jog wheels to be set up to act like vinyl?

this is the error when trying to use jog wheel:

Uncaught exception at line 180 in file C:/Users/dssv/AppData/Local/Mixxx/controllers/Behringer-CMD-Studio-2A-JM-scripts.js: TypeError: Result of expression ‘B2A.scratchMode’ [undefined] is not an object.

thanks
Sam

Yes, that is a possible error on that mapping, so contact its developer

Hi, thanks, it seems to have sorted itself out now. all working now i think!